Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal







REMOVAL





1. Disconnect the negative battery cable.
2. Clean the top of the Hydraulic Control Unit (HCU) near the hydraulic lines.

NOTE: To aid in reassembly, insure the hydraulic brake lines and corresponding connections at the HCU are clearly marked before disassembly.

3. Disconnect the hydraulic lines (1-6) from the HCU. Cap the hydraulic lines and connections with plugs.




4. Disconnect the Controller Antilock Brake (CAB) harness connector (1).
5. Remove the retaining screws (2) from the Integrated Control Unit (ICU) retaining bracket.
6. Pull the ICU upwards, carefully pushing the hydraulic brake lines to one side.
7. Remove the retaining screws that hold the CAB to the HCU and carefully separate the CAB from the HCU.
pro multis · About Operation CHARM