Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Radiator >> Service and Repair >> Removal and Replacement >> Radiator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Radiator - Installation







INSTALLATION





1. Carefully lower the radiator into the vehicle.
2. Connect the lower radiator hose (2).
3. Connect the coolant recovery reservoir hose (1).
4. Install the transmission cooler line (3) (automatic transmission only). Tighten the line to 10 Nm (89 in. lbs.).




5. Connect the upper radiator hose (1).




6. Connect the transmission cooler line (1) located in the middle front of the vehicle (automatic transmission only). Installation.




7. Using a suitable tool (1) install the radiator retaining clamps (2).




8. Install the two condenser retainer bolts (1) into the radiator support. Tighten the bolts to 10 Nm (89 in. lbs.).




9. Install the radiator fan. Radiator Fan - Installation.
10. Install the air inlet tubes.
11. Refill the cooling system. Service and Repair.
12. Connect the negative battery cable.
13. Start the engine and check for coolant leaks.
14. Recheck the coolant level.
pro multis · About Operation CHARM