Removal

REMOVAL





1. Remove the lower instrument panel cover (2) from the instrument panel (1). Instrument Panel - Removal.




2. Disconnect the blower motor electrical connector (1) from the relief in the blower motor door.




3. Slide the motor door catch mounts (1) to the sides.
4. Swing the blower motor door down.




NOTE: The electrical leads are a one-way connection to the blower motor.

5. Disconnect the electrical leads blue (2) and red (3).
6. Remove the screws (1) attaching the blower motor resistor (4) to the blower motor assembly.
7. Remove the blower motor (4) resistor from the assembly.