Removal

REMOVAL

WARNING: Review the warnings and cautions before performing the following operation.





1. Evacuate the refrigerant from the system. Refrigerant System Evacuate.
2. Disconnect the electrical connector (2).
3. Remove the upper pressure line (1).
4. Remove the refrigerant pressure sensor (2).
5. Raise and support the vehicle.
6. Remove the wheel and tire assembly.
7. Remove left inner fender (front section) by removing the plastic nuts and the screws attaching the panel to the inner fender liner.




8. Remove the pressure line (1).
9. Remove the mounting nuts (2).
10. Remove the receiver/drier from the vehicle.