Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Spark Plug >> Service and Repair >> Spark Plug - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Spark Plug - Installation







INSTALLATION





1. Using a spark plug gap gauge (1), gap the spark plugs to 1.00 mm (.039 in.) before installation.
2. Start the spark plugs into the cylinder head by hand to avoid cross threading.
3. Tighten the spark plugs to 28 Nm (21 ft. lbs.).




NOTE: When installing the spark plug cables, route the cables correctly. Failure to route the cables properly can cause improper spark plug phase-shift.

4. Install the spark plug cables to the appropriate spark plug location (G & K) (plug side).

NOTE: Refer to the reference pad cast into the cylinder head cover to identify proper spark plug/spark plug cable orientation.





NOTE: When installing spark plug cables, insure a positive connection is made. A snap should be felt when a good connection is made between the spark plug cable and the spark plug.

5. Insure a firm connection is made from the spark plug cables (2) to the spark plugs.
pro multis · About Operation CHARM