Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Spark Plug >> Service and Repair >> Spark Plug - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Spark Plug - Removal







REMOVAL





CAUTION: When disconnecting a high tension cable from a spark plug or from the ignition coil, twist the rubber boot slightly (1/2 turn) to break it loose. Grasp the boot (not the cable) and pull it off with a steady, even force.

1. Twist and pull the metal clad spark plug cable boots (2) to remove them from the spark plugs.




NOTE: Avoid allowing debris to fall into the spark plug holes during replacement.

2. Clean the cylinder head spark plug recesses (2) using low pressure compressed air.

CAUTION: Do not use power tools to replace spark plugs. Damage to the cylinder head can result.

3. Use a rubber insulated spark plug socket and a hand ratchet to remove the spark plugs (1).
4. Remove the spark plugs (1) from the engine.
pro multis · About Operation CHARM