Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Service and Repair >> Transmission Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Control Module - Installation







TRANSMISSION CONTROL MODULE - LHD





1. Connect the TCM harness connectors and attach the TCM (2) to the base plate with the two retaining screws (1).




2. Rotate the base plate and install it over the mounting studs on the floor panel.

NOTE: Be sure not to pinch or cause interference with the wiring harnesses while locating the base plate to the floor mounting studs.

3. Install the three plastic retaining nuts (1) and secure the base plate to the vehicle floor.




4. Install the foam insulation panel.

NOTE: Make sure the aligning tabs of the base plate are positioned correctly in the foam insulating panel.

5. Install the carpeting in the passenger footwell.
6. Install the floor mat to the carpet.
pro multis · About Operation CHARM