Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Clutch: Service and Repair







STANDARD PROCEDURE - MASTER CYLINDER BLEEDING





WARNING: RISK OF POISONING DUE TO SWALLOWING BRAKE FLUID. RISK OF INJURY DUE TO BRAKE FLUID COMING INTO CONTACT WITH THE SKIN AND EYES.

NOTE: Only pour brake fluid into suitable, appropriately marked containers. Wear protective clothing and safety glasses when handling brake fluid.

1. Remove the brake master cylinder reservoir cap (1).
2. Connect a pressure bleeder to the brake master cylinder reservoir.




3. Raise and support the vehicle.
4. Remove the bleeder screw rubber access plug (1).
5. Remove the bleeder screw rubber cap.




6. Open the bleeder screw (1) on the slave cylinder.
7. Allow the brake fluid to flow until there are no bubbles and fluid is clear.
8. Close the bleeder screw.
9. Install the bleeder screw rubber cap.
10. Install the bleeder screw rubber access plug.
11. Lower the vehicle.
12. Disconnect the pressure bleeder.
13. Install the brake master cylinder reservoir cap.
14. Check the operation of the clutch.
pro multis · About Operation CHARM