Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Transmission Front Section >> Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Assembly







ASSEMBLY

1. Drive in the sleeves (6) using a mallet.
2. Install the shift shaft bearing (1).

NOTE: The input and counter shaft bearings must be fully seated before installing the locking plates.

3. Install the input shaft bearing (2) and the countershaft bearing (3).
4. Install the locking plates (5) and bolts (4). Tighten the bolts to 9 Nm (7 ft. lbs.).
5. Assemble the front and rear transmission sections. Assembly.
6. Install the transmission. Manual Transmission/Transaxle - Installation.
pro multis · About Operation CHARM