Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Heater Core >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal







REMOVAL

NOTE: The HVAC housing assembly must be removed from vehicle for service of the heater core.

NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.





1. Remove the HVAC housing assembly and place it on a workbench HVAC Housing - Removal.
2. Remove the left floor distribution duct Floor Ducts - Removal.
3. Remove the three screws (1) that secure the heater core cover (2) to the driver side of the air distribution housing (3) and the HVAC housing (4) and remove the cover.




NOTE: If the foam seal for the flange is deformed or damaged, it must be replaced.

4. Remove the foam seal (1) from the flange (2) located on the driver side of the HVAC housing (6).
5. Remove the two screws (4) that secure the heater core (5) to the driver side of the air distribution housing (3).
6. Carefully pull the heater core out of the driver side of the air distribution housing.
7. If required, remove the retaining clips that secure the heater core tubes to the heater core and disconnect the tubes from the heater core and remove and discard the O-ring seals. Service and Repair
pro multis · About Operation CHARM