B1A24

B1A24-KEY NOT PROGRAMMED

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on.





Diagnostic Test

1. PROGRAM ALL OF THE IGNITION KEYS
Turn the ignition on.
With the scan tool, attempt to program the key(s) into the SKREEM.
Was the programming of the key(s) successful?

Yes

- Perform the SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests.

No

- Replace the ignition key and attempt to program it into the SKREEM. If the DTC resets, replace and program the Sentry Key Remote Entry Module (SKREEM).

NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the SKREEM.

- Perform the SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests.