Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Service and Repair >> Sentry Key Remote Entry Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sentry Key Remote Entry Module - Installation







INSTALLATION





When a PCM and the SKREEM/WCM are replaced at the same time, perform the following steps in order Programming the Sentry Key Remote Entry Module (SKREEM).

- Program the new PCM.
- Program the new SKREEM/WCM.
- Replace all ignition keys and program them to the new SKREEM/WCM.

1. Position the SKREEM/WCM (3) on the ignition lock housing and install the retaining screw (2).




2. Connect the SKREEM/WCM electrical connector (4).
3. Install the right multi-function switch Installation.
4. Install the upper and lower steering column shrouds Installation and Installation.

NOTE: On vehicles equipped with the optional Sentry Key Immobilizer System (SKIS), when the SKREEM is replaced with a new unit, a diagnostic scan tool MUST be used to initialize the new SKREEM and to program at least two Sentry Key transponders before the vehicle can be operated Sentry Key Immobilizer System (SKIS) Initialization.

5. Connect the battery negative cable.
pro multis · About Operation CHARM