Control Assembly: Description and Operation

DESCRIPTION





The A/C-heater control (1) for the manual temperature control (MTC) single zone system allows one temperature setting for the entire vehicle. All controls are identified by ISO graphic symbols.

The heating-A/C system uses a combination of electrical and cable operated controls. These controls provide the vehicle operator with a number of setting options to help control the climate and comfort within the vehicle.

The A/C-heater control is located in the instrument panel and contains:

- a rotary control for mode control of the discharged air (2).
- a rotary control for fan speed selection and turning the heating-A/C system on and off (3).
- a rotary control for temperature control of the discharged air (4).
- a push-button control for recirculation control of the discharged air (5).
- a push-button control for turning the A/C on and off (6).

The A/C-heater control cannot be adjusted or repaired and must be replaced if inoperative or damaged. The control knobs for the A/C-heater control are available for service replacement.