Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Service and Repair >> A/C High Pressure Switch >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Clean any foreign matter from the switch mounting bore at the rear of the A/C compressor (3).
2. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it onto A/C high pressure switch (2). Use only the specified O-ring as it is made of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
3. Install the A/C high pressure switch onto the rear of the A/C compressor.
4. Using snap ring pliers (Special Tool C-4574 or equivalent), install the snap ring that secures the A/C high pressure switch to the A/C compressor.
5. Connect the wire harness connector (1) to the A/C high pressure switch.
6. Lower the vehicle.
7. Reconnect the negative battery cable.
8. Evacuate the refrigerant system Refrigerant System Evacuate.
9. Charge the refrigerant system Refrigerant System Charge.
pro multis · About Operation CHARM