Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Installation







INSTALLATION





1. Install the PCM bracket and three mounting bolts (2) to the PCM and tighten to 11.8 Nm (105 in. lbs.).




2. Tip PCM and bracket assembly into bracket.




3. Locate the PCM and bracket assembly bracket on the tab (2).




4. Install the four mounting bolts to the PCM mounting bracket (1) and tighten to 10.7 Nm (95 in. lbs.).




5. Relocate and install the clutch reservoir.




NOTE: The electrical connector for the PCM are COLOR Coded.

6. Connect and lock the 3 or 4 electrical connectors (1) to the Powertrain Control Module (PCM).
7. Install plastic clips that hold the wiring harness to the support bracket.
8. Connect the negative battery cable.
pro multis · About Operation CHARM