Starter Motor - Installation

2.4L





1. Reinstall starter motor into vehicle lower engine compartment.
2. Install starter motor mounting bolts and torque to 54 Nm (40 ft. lbs.).
3. Connect starter motor wiring. Torque solenoid battery cable nut to 10 Nm (90 in. lbs.).




4. Install Engine Structural Collar, Installation.

CAUTION:
The torque procedure for the structural collar must be followed, as damage to the oil pan or collar could occur.


5. Lower vehicle from hoist.
6. Reconnect battery negative cable.
7. Reinstall air cleaner box cover, Installation.
8. Verify operation of vehicle and systems.
9. Close hood and remove from hoist.