Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Driver Door Fails To Lock
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Door Fails To Lock







*DRIVER DOOR FAILS TO LOCK





For a complete wiring diagram Consult Diagrams/Electrical





Diagnostic Test

1. (P3) DRIVER DOOR LOCK DRIVER WIRE SHORT TO GROUND




Turn the ignition off.
Remove the inner door trim panel to gain access to the Driver Door Module "C1" connector.
Disconnect the Driver Door Module "C1" connector.
Measure the resistance between the (Z821) Ground and the (P3) Driver Door Lock Driver circuit in the Driver Door Module "C1" connector.
Is the resistance below 200 ohms?

Yes

- Repair the (P3) Driver Door Lock Driver wire for a short to ground.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.

No

- Replace the Driver Door Module.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test.

pro multis · About Operation CHARM