Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Tube >> Service and Repair >> EGR Tube - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Tube - Removal







3.8L





WARNING: The normal operating temperature of the exhaust gas recirculate (EGR) valve and tube is very high. Therefore, never work around or attempt to service any engine component until it is completely cooled.

1. Remove bolts (3) and exhaust gas recirculate (EGR) tube (2) from EGR valve (5).
2. Remove and discard gasket located between EGR valve (2) and EGR tube (5).




CAUTION: DO NOT use air tools when removing bolts from intake manifold. The intake manifold is made of plastic and it is critical to remove bolts using hand tools only. The use of air tools can cause the threads of the intake manifold to become stripped.

3. Remove bolts and EGR tube from intake manifold.




4. Inspect rubber silicone seal for wear or cracks, replace as necessary.
pro multis · About Operation CHARM