Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Regulator >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





NOTE: The O-rings should be placed on the regulator first, to prevent them from being rolled out of position during regulator install.

1. Lightly lubricate the O-rings with clean engine oil and place them onto regulator.
2. Push regulator down and into place.
3. Install ground wire.
4. Install module and gasket seal.
5. Ensure seal is properly positioned in fuel tank groove.
6. Install the module lock ring.

NOTE: Use a brass punch to Install the 1/4 turn lock ring. Make sure all 5 tabs are properly seated.

7. Connect fuel line and vapor lines.




8. Install fuel tank, Fuel Tank - Installation.
9. Connect negative battery cable.
10. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.
pro multis · About Operation CHARM