Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Installation
INSTALLATION 1.
Connect wiring connector (1) to brake pedal position sensor (2).
NOTE: Make sure pin in pedal assembly fits into slot in sensor carriage when installing sensor. 2.
Place sensor against mounting bracket and into brake pedal. Move carriage as necessary to align slot with pin. Install two mounting screws. Tighten screws to 7.5 Nm (66 in. lbs.).
3.
Connect ground (-) cable to negative post of battery.
