Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Roof and Associated Components >> Convertible Top >> Convertible Top Position Sensor / Switch >> Service and Repair >> Switch-Deck Bar Cylinder Position >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







INSTALLATION





1. Position the deckbar cylinder position switch (2) onto the deckbar cylinder (3) in the vehicle trunk area.
2. Secure the position switch to the deckbar cylinder. Push the switch retainer (4) over the switch (2). Push the position switch retainer locking tab (1) towards the retainer (4) until the two are fully engaged.




3. Secure the position switch to the deckbar cylinder. Position the switch on the underside of the cylinder and push the switch retainer over the switch. Push the position switch retainer locking tab towards the retainer until the two are fully engaged.
4. Connect the position switch (2) wire harness routing clips to the left inner quarter panel.
5. Connect the deckbar cylinder position switch electrical connector (3).
6. Install the left trunk trim panel.
7. Install the rear trunk trim panel.
8. Close the rear decklid.
9. Connect the battery negative cable.
pro multis · About Operation CHARM