Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Removal >> Side - C-Pillar Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Side - C-Pillar Sensor







SIDE - C-PILLAR SENSOR





1. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

2. Remove the rear quarter panel trim Lower Quarter Trim - Removal.
3. Remove the screw (4) that secures the side impact sensor (3) to the C-pillar (2).
4. Disconnect the electrical connector (1) from the sensor (3).
5. Remove the sensor (3) from the C-pillar.
pro multis · About Operation CHARM