Intake Manifold: Specifications
INTAKE MANIFOLDLower Intake Manifold
- Gradually tighten in sequence shown until a torque of 28 Nm (250 in. lbs.) is obtained.
Upper Intake Manifold
- Tighten bolts gradually starting in the center working outward until a torque of 12 Nm (105 in. lbs.) is obtained.
THROTTLE BODY
CAUTION: The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.
Tighten the three bolts and one stud in a mandatory torque criss - cross pattern sequence to 5.5 Nm (50 in. lbs.)