Catalytic Converter - Installation

3.3/3.8L





1. Position new gasket (2) onto the manifold flange and install catalytic converter (4). Tighten bolts (3) to 37 Nm (27 ft. lbs.).




NOTE: Be careful not to twist or kink the oxygen sensor wires.

2. Install (if removed) and connect the downstream oxygen sensor electrical connector (1).
3. Install the muffler/resonator assembly.Muffler - Installation.
4. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
5. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.