Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> 300 V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Removal and Replacement >> Structural Dust Cover - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Structural Dust Cover - Installation






INSTALLATION





1. Install structural collar (1) from the right rear.






CAUTION: The structural collar must be tightened using this service procedure, or damage to transmission case and/or oil pan may occur.

2. Position structural collar (3) in place.
3. Finger tighten all bolts (2),(4).

NOTE: Make sure that structural collar (3) is flush with the oil pan (1) and the transmission bell housing.

4. Install the vertical collar bolts (2) to oil pan, pre-torque bolts to 1.1 Nm ( 10 in. lbs.).
5. Install the horizontal collar bolts (4) to transmission and tighten to 55 Nm ( 40 ft. lbs.).
6. Starting with the center vertical bolts and working outward, final torque all bolts to 55 Nm ( 40 ft. lbs.).





7. Install lower splash shield (2) and retaining bolts (1).
8. Lower vehicle.





9. Connect negative battery (1) cable.

pro multis · About Operation CHARM