Installation

INSTALLATION





1. Install o-ring (1).





2. Install ground ring (1) on fuel pressure regulator (2).





3. Install fuel pressure regulator (1) and ground ring. Note location of ground ring.





4. Install ground wire (2).
5. Install fuel pressure regulator retaining clip (1).





6. Install module into tank.
7. Align marks on the module for proper orientation.





8. Install module lock-ring (2).
9. Use SAE fuel pump lock ring wrench 9340 (1) to tighten right side module lock ring.





10. Connect the fuel supply line (2) to module (1).





11. Install plastic access covers to floor pan right side.
12. Fold the foam pad covering access cover for modules back into place.





13. Install rear lower seat cushion (1).
14. Fill fuel tank.





15. Connect negative battery cable to battery (1).
16. Use the scan tool to pressurize the fuel system and check for leaks.