Fluid Contamination

FLUID CONTAMINATION

Transmission fluid contamination is generally a result of:

- adding incorrect fluid.
- failure to clean dipstick and fill tube when checking level.
- engine coolant entering the fluid.
- internal failure that generates debris.
- overheat that generates sludge (fluid breakdown).
- failure to replace contaminated damper after repair.

The use of non-recommended fluids can result in transmission failure. The usual results are erratic shifts, slippage, abnormal wear and eventual failure due to fluid breakdown and sludge formation. Avoid this condition by using recommended fluids only.

Wipe the dipstick cap and fill tube clean before checking fluid level. Dirt, grease and other foreign material on the cap and tube could fall into the tube if not removed beforehand. Take the time to wipe the cap and tube clean before withdrawing the dipstick.

Engine coolant in the transmission fluid is generally caused by a cooler malfunction. The only remedy is to replace the radiator as the cooler in the radiator is not a serviceable part. If coolant has circulated through the transmission, an overhaul is necessary.

Replace the transmission damper whenever a failure generates sludge and debris. Normal flushing procedures will not remove all contaminants.