Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> Sebring Convertible V6-2.7L Flex Fuel >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Removal and Replacement >> Structural Dust Cover - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Structural Dust Cover - Installation






INSTALLATION






CAUTION: The collar must be tightened using this service procedure, as damage to transaxle case and/or oil pan may occur.

1. Position the structural collar (3) on the engine and transaxle.
2. Finger tighten all bolts (1) and (2).

NOTE: Make sure that structural collar (3) is flush with the oil pan and the transmission bell housing.

3. Install the vertical collar bolts (2) to the oil pan, pre-torque bolts to 1.1 Nm ( 10 in. lbs.).
4. Install the horizontal collar bolts (1) to the transmission and tighten to 55 Nm ( 40 ft. lbs.).
5. Starting with the center vertical bolts and working outward, final torque all bolts to 55 Nm ( 40 ft. lbs.).





6. Install the fore/aft cross-member (4) Crossmember - Installation





7. Install the belly pan (2), if equipped.
8. Lower the vehicle.

pro multis · About Operation CHARM