Engine Torque Specifications

TORQUE






2.7L, EER

CYLINDER HEAD





Tighten bolts in sequence shown, using the following steps and torque values:
Step 1: Bolts 1-8 48 Nm (35 ft. lbs.)
Step 2: Bolts 1-8 75 Nm (55 ft. lbs.)
Step 3: Bolts 1-8 75 Nm (55 ft. lbs.)
Step 4: Bolts 1-8 +90° Turn

CAUTION: Do not use a torque wrench for this step.

Step 5: Bolts 9-11 28 Nm (250 in. lbs.)

HEAD BOLT REUSE/REPLACE










The cylinder head bolts must be examined BEFORE reuse. If the threads are necked down the bolts must be replaced

INTAKE MANIFOLD





Lower





Upper

Camshaft Bearing Cap






MAIN BEARING CAP

NOTE: The main bearing cap bolts must be tightened in the proper sequence. First the inner main cap bolts, secondly the windage tray bolts, and lastly the main cap tie (horizontal) bolts.