Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> Town & Country V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Lateral Accelerometer >> Service and Repair >> Dynamics Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Dynamics Sensor - Installation






INSTALLATION






NOTE: When installed, arrow on dynamics sensor housing must point towards front of vehicle.

1. Position the dynamics sensor (2) on the mounting bracket (4) with the arrow pointing to the front of the vehicle and the connector facing the passenger side of the vehicle.
2. Install the two mounting screws (1). Tighten the screws to 9 Nm (80 in. lbs.).
3. Connect the wiring harness connector (3) to the dynamics sensor (1).





4. Install the right intermediate floor distribution duct (2).





5. Install the instrument panel center support brackets (3) and mounting screws (2). There is one bracket on each side of the tunnel structure.
6. Reinstall the carpet onto the front floor pan and under the instrument panel Carpet - Installation.





7. Install the instrument panel center stack console. Instrument Panel Bin - Installation
8. Connect the battery negative cable to the battery post.
9. Perform the Diagnostic Verification Test and clear any faults. ABS Verification Test

pro multis · About Operation CHARM