Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2009 >> Town & Country V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Crankshaft Position Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor - Removal






3.3/3.8L






WARNING: The normal operating temperature of the exhaust system is very high. Therefore, never work around or attempt to service any part of the exhaust system until it is cooled. Personal injury caused from burns can result from contact made to the exhaust system components.

CAUTION: When disconnecting sensor electrical connector, do not pull directly on harness connector wires. Damage to the harness connector and/or wires may occur.

1. Disconnect and isolate negative battery cable at battery.
2. Disconnect harness connector (3) from the crankshaft position sensor (2).
3. Remove bolt (1).
4. Remove crankshaft position sensor (2) from the transmission housing (4).

pro multis · About Operation CHARM