Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2010 >> 300 V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Impact Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Impact Sensor - Removal






REMOVAL

FRONT IMPACT SENSOR





1. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

NOTE: If replacing the left front impact sensor, the air intake system needs to be removed.

2. Disconnect the electrical connector (3).
3. Remove the two mounting screws (2).

SIDE IMPACT SENSOR

B-PILLAR MOUNTED SIDE IMPACT SENSOR





1. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

2. Remove the B-pillar trim panel B-Pillar Trim Panel - Removal.
3. Disconnect the electrical connector (1).
4. Remove the two retaining screws (2).

C-PILLAR MOUNTED SIDE IMPACT SENSOR





1. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

2. Remove the C-pillar trim panel C-Pillar Trim Panel - Removal.
3. Disconnect the electrical connector (3).
4. Remove the two retaining screws (2).

pro multis · About Operation CHARM