Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2011 >> 300 V6-3.6L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Ultrasonic Sensor >> Service and Repair >> Intrusion Module Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Intrusion Module Sensor - Installation





INSTALLATION

Second Row Intrusion Sensor

The second row intrusion sensor is in the snap plate of the second row lamp assembly. Intrusion Module - Installation.

Third Row Intrusion Sensor

1. Install the intrusion sensor into the dome lamp assembly.
2. Connect the intrusion sensor.
3. Install the third row dome lamp.
4. Connect the negative battery cable.

Sensor Harness

1. Lower the headliner to gain access to the sensor harness which is glued to the top of the headliner. Headliner - Removal
2. Overlay the new harness near the old one and secure it with tape.
3. Cut off the old connectors but leave the old harness. It is safer to leave it because removing it may damage the headliner.
4. Raise the headliner as necessary to install and connect the sensors.
5. Finish installing the headliner. Headliner - Installation.
pro multis · About Operation CHARM