Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2011 >> 300 V6-3.6L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Headlamp Alignment Control Module >> Service and Repair >> Adaptive Front Lighting System Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Adaptive Front Lighting System Module - Installation





INSTALLATION





1. Position the Adaptive Front Lighting System (AFLS) module (1) into the right front corner of the engine compartment.
2. Reconnect the headlamp and dash wire harness connector (3) to the AFLS module connector receptacle.
3. Align the AFLS module mount to the blade-type bracket (2) integral to the right front corner of the Power Distribution Center (PDC) bracket.
4. Push the AFLS module mount down over the bracket until the latch feature snaps into place.
5. Reconnect the battery negative cable.

NOTE: Whenever the Advanced Front Lighting System (AFLS) module is removed and reinstalled or replaced with a new unit, it is necessary for the AFLSM to be configured and calibrated to the vehicle using a calibration procedure. Follow the programming steps outlined in the diagnostic scan tool for the "AFLS Module Calibrate" routine under "Miscellaneous Functions" for the "AFLS Module" menu item as appropriate.


pro multis · About Operation CHARM