Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> 300 RWD SRT-8 V8-6.4L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Starter - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter - Installation






6.4L






NOTE: Do not allow the starter motor to hang from wire harness.

1. Position the starter (5) into transmission but do not install bolts.
2. Connect the solenoid harness connector to starter motor (snaps on).
3. Position the battery cable to solenoid stud and install the battery cable eyelet nut.Tighten to 11 Nm (8 ft. lbs.).
4. Install the lower starter mounting retainer (4).
5. Install the two starter stub mounting bolts (3).
6. Tighten all three starter mounting retainers (3) and (4) to 25 Nm (19 ft. lbs.)
7. Install the heat shield (2).
8. Install the shield nuts (1).Tighten to 18 Nm (13 ft. lbs.)
9. Lower the vehicle.
10. Connect negative battery cable.

pro multis · About Operation CHARM