Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2012 >> Town & Country V6-3.6L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Lumbar Control Switch - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lumbar Control Switch - Installation





INSTALLATION

NOTE: Take the proper precautions to protect the face of the seat cushion side shield from cosmetic damage while performing this procedure.

NOTE: Driver side shown. Passenger side similar.





1. Position the lumbar control switch (1) to the seat cushion side shield (4) and align the switch to opening in the side shield.
2. Engage the four retaining tabs (2 and 5) that secure the lumbar control switch to the seat cushion side shield. Make sure the tabs are fully engaged.
3. Connect the wire harness connector (3).
4. Install the seat cushion side shield Seat Cushion Side Shields - Installation.
5. Reconnect the negative battery cable.
6. Verify proper power lumbar support operation.

pro multis · About Operation CHARM