Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2013 >> Town & Country V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Installation






GAS






1. Install the powertrain control module (PCM) (1) with three bolts (2) tightened to 4.5 Nm (40 in. lbs.).





2. Connect and lock the electrical connectors (1) to the PCM.





3. Reposition the PCM access cover (1) and install the push pin (2).

4. Lower the vehicle.

5. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).

NOTE:
If a new PCM is installed, it must be programed with the original Vehicle Identification Number (VIN) and mileage. If this is not done, a Diagnostic Trouble Code (DTC) may set.

NOTE:
If a new PCM is installed Programming and Relearning.

6. If a new PCM is being installed, use a scan tool and program the new PCM with the original VIN and vehicle mileage.

pro multis · About Operation CHARM