Cylinder Head
Using a torque wrench, gradually tighten the head bolts over three stages in the sequence shown.
Tighten the bolts to the specified torque in the final stage.
Tightening Torque: 5.5 - 6.5 kg-m (39.8 - 47 ft-lb, 53.9 - 63.7 Nm)
Tighten the bolts to the specified torque in the final stage.
Tightening Torque: 5.5 - 6.5 kg-m (39.8 - 47 ft-lb, 53.9 - 63.7 Nm)