Master Cylinder Service Steps
NOTES, WARNINGS, AND HINTSFundamentals and Basics
PARTS REMINDER LIST
Fundamentals and Basics
RECOMMENDED TOOLS
Tools and Equipment
PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Inspect master-cylinder.
Testing and Inspection
4. Remove master-cylinder.
Service and Repair
5. Replace master-cylinder as necessary.
6. Bench bleed master-cylinder.
Service and Repair
7. Install master-cylinder.
Service and Repair
7. Bleed front and rear brakes.
Service and Repair
8. Adjust rear brakes.
Adjustments
9. Install tire and wheel assembly.
10. Perform After Repairs Test Drive.
Testing and Inspection
ENVIRONMENTAL AND SAFETY CONCERNS
Environmental Impact Information