Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1987 >> Dakota 2WD L4-135 2.2L SOHC >> Repair and Diagnosis >> Cruise Control >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control: Service and Repair


SPEED CONTROL SERVO

1. Disconnect speedometer cables at servo, then the vacuum hoses.
2. Disconnect electrical connectors at servo, then remove two attaching nuts from mounting studs.
3. Pull servo from bracket, then the speed control cable from servo.
4. Remove cable to servo retaining clip.
5. Reverse procedure to install. Torque attaching nuts to 80 inch lbs.

SERVO THROTTLE CABLE ASSEMBLY

1. Remove air cleaner assembly.
2. Remove snap ring, then disconnect cable at retaining clip and at carburetor stud.
3. Disconnect cable at servo.
4. Remove cable assembly.
5. Reverse procedure to install.

SPEED CONTROL SWITCH

1. Disconnect battery ground cable.
2. Disconnect speed control connector at end of steering column, then remove steering wheel.
3. Remove turn signal switch, then the lever attaching screw.
4. Remove steering column cover plate, then remove lead wires and terminals from lower end of speed control switch, using tool No. C-4135.
5. Tape terminals, then pull lever and wires out.
6. Reverse procedure to install. A guide wire will be required to install wiring harness of new speed control switch through steering column opening.



pro multis · About Operation CHARM