Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal/Installation

Fig. 45 Airbag system diagnostic module:





REMOVAL

1. Disconnect and isolate battery ground cable, then waist at least 10 minutes prior to performing services.
2. Remove forward console.
3. Remove module and bracket attaching screws.
4. Carefully lift module up and rearward, disconnect electrical connectors, then remove the module.

INSTALLATION

1. Position module and bracket facing forward, then connect electrical connectors and lock into position.
2. Using locating tab, place module and bracket on lower bracket.
3. Install module and bracket supplied attaching screws. Torque to 35 inch lbs.
4. Install forward console.
5. Do not connect battery ground terminal. Refer to Air Bag Systems/Testing and Inspection/Procedures for operational check procedure.