Coolant Temperature Sensor/Switch (For Computer): Service and Repair
WARNING: HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.
Coolant Temperature Sensor Location:
REMOVAL
1. Partially drain cooling system.
2. Disconnect electrical connector from sensor.
3. Remove sensor from intake manifold.
INSTALLATION
1. Install sensor.
^ Tighten to 27 Nm (20 ft. lbs.) torque.
2. Connect electrical connector to sensor.
3. Replace any lost engine coolant.