Replacement

1. Disconnect battery ground cable.
2. Remove wiper arm assemblies, then disconnect fluid hoses from wiper arms.
3. Open hood assembly, then remove cowl top plenum grille and disconnect fluid hose from connector.
4. Remove cowl plenum chamber plastic screen, then the wiper pivot screws.
5. Disconnect pivots from cowl top mounting positions, then push pivots down into plenum chamber.
6. Remove nut from wiper output shaft, then linkage assembly.
7. Disconnect wiper motor electrical connector, then remove three wiper motor attaching nuts.
8. Remove wiper motor.
9. Reverse procedure to install.