Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1994 >> 2500 4x2 Pickup V8-318 5.2L Magnum >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Low Pressure Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Low Pressure Sensor / Switch: Service and Repair

Fig 25 High Pressure Cut-off Switch -- Typical:






HIGH PRESSURE CUT-OFF SWITCH

Removal
1. Disconnect and isolate the battery negative cable.
2. Unplug the wire harness connector from the switch.
3. Unscrew the switch from the discharge line fitting.

Installation
1. Install and tighten the switch.
2. Unplug the wire harness connector into the switch.
3. Connect the battery negative cable.

Fig 28 Low Pressure Cycling Clutch Switch:






LOW PRESSURE CYCLING CLUTCH SWITCH
1. Disconnect and isolate the battery negative cable.
2. Unplug the wire harness connector from the switch on the top of the accumulator.
3. Unscrew the switch from the fitting on the accumulator.
4. Reverse the removal procedures to install.
pro multis · About Operation CHARM