Windshield Washer Switch: Service and Repair

The multi-function switch includes the turn signal, headlight beam select and windshield wiper switches. If any of these switches are found defective, the entire multi-function switch must be replaced.
1. Disconnect battery ground cable.
2. On models with tilt steering, remove tilt lever.
3. On all models, remove upper and lower steering column covers, then remove multi-function switch tamper proof mounting screws.
4. Pull switch from column and loosen connector screw, then remove connector from switch. Screw remains in connector.
5. Remove switch from the vehicle.
6. Reverse procedure to install.