Replacement

1. Disconnect battery ground cable, then remove wiper arms.
2. Open hood and remove cowl top plenum grille, then disconnect wiper fluid hoses.
3. Remove cowl plenum chamber plastic screen, then the wiper pivot screws.
4. Push pivots down into plenum chamber, then remove nut from wiper output shaft and linkage assembly.
5. Disconnect wiper motor electrical connector, then remove wiper motor mounting screw and nuts.
6. Remove wiper motor.
7. Reverse procedure to install, noting the following:
a. Torque pivot screws, mounting screws and nuts to 5-6 ft. lbs.
b. Torque drive crank shaft nut to 7.5-8.5 ft. lbs.