Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 1995 >> RAM 2500 Van V8-360 5.9L Magnum >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Service and Repair




Removal

1. Raise and support vehicle
2. Place drain pan below the sensor
3. Clean area around sensor before removal
4. Disconnect the electrical connector at sensor
5. Remove (unthread) the sensor from transmission cooling line. to prevent twisting and damage to cooler line, be sure to use a back up wrench on cooling line.

installation

1. Install the sensor into the transmission cooling line. tighten sensor to 11 Nm (8ft lbs) torque.
2. Connect the electrical connector at sensor
3. Lower vehicle
4. Check and adjust automatic transmission fluid.
pro multis · About Operation CHARM