Front Door Window Regulator

Front Door Window Regulator - Manual:

MANUAL WINDOW REGULATOR REMOVAL
1. Remove trim panel, silencer pad, and water shield.
2. Raise glass to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.
3. Remove bolts holding window regulator to inner door panel.
4. Slide roller from window lift channel. Rotate regulator to bring lift arm through access hole first.
5. Remove regulator assembly from door.
6. Reverse the preceding operation for installation.

Front Door Window Regulator - Power:

POWER WINDOW REGULATOR REMOVAL
1. Remove trim panel and water shield and connect window switch to wire connector.
2. Raise glass to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.
3. Disconnect battery negative cable.
4. Remove bolts holding window regulator to inner door panel.
5. Slide roller from window lift channel. Rotate regulator to bring lift arm through access hole first.
6. Remove regulator assembly from door.
7. Reverse the preceding operation for installation.