Evaporator Temperature Sensor / Switch: Service and Repair

REMOVAL

Glove Box:

1. Open glove box.
2. Disengage clip holding checkstraps to glove box door.
3. Pivot glove box downward and disengage hinge hooks from instrument panel.
4. Remove glove box.

Evaporator Probe Connector:

2. Disconnect the evaporator probe connector.

Evaporator Probe Grommet:

3. Using a flat blade pry tool, pry the evaporator probe grommet from the HVAC housing.

Evaporator Probe:

4. Remove evaporator probe from evaporator.

INSTALLATION
For installation, reverse the above procedures. Three holes are provided in evaporator for probe location. When reinstalling probe, use a different hole than original one. If a new evaporator is installed, insert the probe in the uppermost hole provided.