Receiver Dryer: Service and Repair

REMOVAL

WARNING: The refrigeration system must be completely empty before proceeding with this operation.

Filter Drier:

1. Recover A/C system refrigerant.
2. Remove liquid line at filter-drier.
3. Remove the (2) bolts holding filter-drier bracket to radiator fan module bracket.
4. Remove the lower liquid line at condenser.
5. Remove the upper radiator crossmember.
6. Pull up on radiator and slide filter-drier from the mounting location.

INSTALLATION
1. Before installation, replace both refrigerant line 0-rings. Then reverse the above procedures.
2. Evacuate and recharge system.